Acrylic & Silicon Roof Restoration

Stop Leaks Cold with Acrylic & Silicone Roof Prevention

Our high-tensile coatings create a seamless, reflective skin that shrugs off UV and ponding water—saving 40-60% versus a full tear-off. Every job syncs to RoofTrack, so you see live photos, budgets, and warranties from day one..

Why Acrylic & Silicone?

  • Seal Seams: High-build liquid closes every fastener & lap.

  • Beat Ponding Water: Silicone laughs at standing water; acrylic flexes with temp swings.

  • Slash Energy Bills: 80% solar reflectivity = cooler HVAC loads.

  • Delay Costly Tear-Offs: Add 10–15 years of service life at a fraction of replacement cost.

What’s in Our Prevention Program?

  • Surface Prep & Power Wash – remove dirt, mildew, and loose granules.

  • Seam / Fastener Reinforcement – acrylic mesh tape or butter-grade silicone.

  • Full-Field Coating – 20- to 30-mil application, sprayed or rolled.

  • Infrared Moisture Scan – verify dry insulation before coating.

  • 10- to 20-Year Manufacturer Warranties – transferable.

  • RoofTrack Upload – photos, spec sheets, warranty docs stored instantly.

Get a FREE Virtual Roof Scan:

  • Single Ply Roofing Restoration

    Single Ply Roofing Restoration

  • Single Ply Roofing Restoration

    Single Ply Roofing Restoration

  • Single Ply Roofing Restoration (2) After

    Single Ply Roofing Restoration (2) After

  • Single Ply Roofing Restoration (2) Before

    Single Ply Roofing Restoration (2) Before

  • Single Ply Roofing Restoration (3) Before

    Single Ply Roofing Restoration (3) Before

  • Single Ply Roofing Restoration (4) After

    Single Ply Roofing Restoration (4) After

Acrylic & Silicone Roof Restoration FAQ’s:

  • Acrylic is a water-based, highly reflective membrane ideal for dry climates; silicone is a solvent-based, pond-proof skin that excels where standing water lingers. Both add seamless protection and extend a commercial flat roof’s life 10 – 15 years.

  • Yes. Our prep process (clean, prime, reinforce seams) bonds acrylic or silicone to TPO, EPDM, PVC, modified bitumen—even coated metal—without new fastener holes.

  • With routine preventative maintenance, acrylic systems typically deliver 10–12 years and silicone 12–20 years before a recoat is needed—backed by manufacturer warranties.

  • Usually not. Most coatings roll or spray on with minimal odor and cure within 24 hours; business can keep humming underneath.

  • No. We install only manufacturer-approved acrylic and silicone systems; new warranties layer on top and can be made transferable.

  • Every inspection photo, moisture reading, warranty, and invoice uploads to your RoofTrack dashboard so you—and auditors—have proof of condition and service history in one click.

  • High-reflective white acrylic and silicone coatings bounce up to 80% of UV, cutting summertime HVAC loads 10–30% on large commercial flat roofs.

  • We apply 20–30 mil (about 2–3 credit cards) dry film thickness. White is most reflective, but tinted topcoats are available if local codes allow.

  • Annual or bi-annual preventive maintenance keeps the warranty intact—think drain cleaning, seam touch-ups, and a quick RoofTrack upload—far simpler than managing leaks or a fresh tear-off.